Description

Fernox DS10 Dryside Cleaner For Modular Boiler/Heat Exchange 7Kg 61029

For each 10 litres of solution required first dissolve 1 kg of powder in a small quantity of warm/hot water in a suitable plastic tank or container. Then add the remaining quantity of water. This should provide a solution of sufficient strength to adequately clean a lightly contaminated heat exchanger in a few minutes. For cases where severe contamination of combustion surfaces has occurred, several units are to be cleaned, or where a reduction in the cleaning time is required, the strength of the solution may be increased to 20% w/v (i.e. 2 kg of powder per 10 litres of water). Neutralise prior to disposal using Fernox System Neutraliser added at a rate of 4 kg System Neutraliser to every 7 kg of DS-10 used. Note: Fernox DS-10 must not be used with boilers employing aluminium heat exchangers. Refer to manufacturer's service literature for detailed instructions. Dryside Cleaner. Cleans the combustion surfaces of modular boilers. Available in 7kg bottles.